Electronic level sensor
LR8009
23
8.2 Menu structure / switching mode (bin = on)
M
M
S
M
M
S
M
M
S
M
M
S
M
M
S
M
M
S
M
M
S
M
M
S
M
M
S
M
cm
%
S
30s
S
M
M
M
S
M
S
S
SELd
OFS
0,0
EF
rES
----
OFF
OFF
OFF
FOU4
OFF
dFo
0.0
LEnG
L
24.0
MEdI
HIGH
Prob
COAX
FOU1
M
M
S
bin
on
FOU2
FOU3
M
M
M
S
PnP
P-n
8.3 Explanation of the menu
SP1/rP1
Upper / lower limit value for the level at which OUT1 switches.
FH1/FL1
Upper / lower limit for the acceptable range (monitored by OUT1).
SP2/rP2
Upper / lower limit value for the level at which OUT2 switches.
FH2/FL2
Upper / lower limit for the acceptable range (monitored by OUT2).
SP3/rP3
Upper / lower limit value for the level at which OUT3 switches.
FH3/FL3
Upper / lower limit for the acceptable range (monitored by OUT3).
SP4/rP4
Upper / lower limit value for the level at which OUT4 switches.
FH4/FL4
Upper / lower limit for the acceptable range (monitored by OUT4).
OUx
Output function for OUTx:
Switching signal for level limit values: hysteresis function [H..] or window function [F..], either normally open
[.no] or normally closed [.nc].
OFS
Offset value for level measurement.
EF
Extended functions / opening of menu level 2.
rES
Restore factory setting.
dr1
Switch-off delay for OUT1:
The menu item is only active if OU1 = Hno or Hnc.
dr2
Switch-off delay for OUT2:
The menu item is only active if OU2 = Hno or Hnc.
dr3
Switch-off delay for OUT3:
The menu item is only active if OU3 = Hno or Hnc.