3
UK
2
OUT on
OUT off
Remove the object, then press the [OUT off] button
►
LED goes out
>
The sensor is to switch when no object is detected:
Press the [OUT on] button when no object is present.
1.
Position the object and press the [OUT off] button.
2.
Setting of the maximum sensitivity
The sensor is to switch when the object is detected:
Align the unit so that no light is reflected.
►
First press the [OUT on] button then the [OUT off] button.
►
The sensor is to switch when no object is detected:
Align the unit so that no light is reflected.
►
First press the [OUT off] button then the [OUT on] button.
►
Lock or unlock the push buttons:
Press both buttons for 10 s.
►
Acknowledgement is indicated by a change of the yellow LED status.
>
Programming failed:
The yellow LED flashes quickly (8 Hz).
>
Measured value difference too small.
•
Max. programming time of 15 min. exceeded.
•
Operation
The LED is lit when the output is switched.
•
Maintenance
Keep the lens of the sensor free from soiling. For cleaning do not use any solvents
or cleaning agents which could damage the plastic lenses.
