UK
3
4 Operating and display elements
1
2 3
LED
[OUT off]
[OUT on]
1:
2:
3:
4 Settings
4.1 The sensor is to switch when the object is detected
1
Position the object.
►
Press [OUT on] for 2 s.
The sensitivity is set to the object.
The LED flashes.
►
>
>
2
Remove the object.
►
Press [OUT off].
The sensitivity is set without object.
The LED goes out. The programming is finished.
►
>
>
4.2 The sensor is not to switch when the object is detected
Position the object (see figure 1) and press [OUT off] for 2 s.
Remove the object (see figure 2) and press [OUT on].
The settings can also be carried out first without object (step 1) and then with
object (step 2).
►
►
