Encoder with ProfiNet interface
30
10 Configuring with STEP7
In the following chapter the configuration of the ifm encoder with the configuration
tool Hardwaremanager STEP 7 is shown exemplarily�
In this example STEP7 version 5�4 SP4 and the CPU 315-2PN/DP or Simotion
Scout with single axis controller D410 (integrated ProfiNet controller) are used�
10.1 Installing the GSDML file
Prior to initial configuration of the system in the hardware configurator of the
software, the GSD files of the encoder must be imported into the software�
Start the software and proceed as follows to import the above GSx files:
►
Open new or existing project�
►
Open hardware configurator�
Copy the required GSx file to the software via menu item [Options] → [Install GSD
Files���]�
Importing a GSD file
The GSDML file is supplied by ifm (free of charge on www�ifm�com)�
In order to display the encoder as a bitmap in STEP7 the file will be installed
automatically with the GSDML file – both files must be in the same directory� The
main software release number in the GSDML file and the firmware must be the
same, e�g� 4�xx�
►
Select the GSD file from the according source directory�
