5
UK
►
If the sensors are installed side by side, observe a minimum distance of 50 mm
between the sensor axes.
6 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical
equipment must be adhered to.
Voltage supply according to EN 50178, SELV, PELV.
► Disconnect power.
►
Connect the unit as follows:
4
3
2
1
L+
L
1 BN
2 WH
3 BU
Core colours of ifm sockets: 1 = BN (brown), 2 = WH (white), 3 = BU (blue)
Colours to DIN EN 60947-5-2
Information about available sockets/connectors at www.ifm.com.
7 Technical data and scale drawing
Technical data and scale drawing at www.ifm.com
8 Maintenance, repair, disposal
If used correctly, no maintenance and repair measures are necessary.
In case of strongly polluted media: mount a filter before the inlet (IN).
Recommendation: use a 200-micron filter. Only the manufacturer is allowed to
repair the unit.
After use dispose of the unit in an environmentally friendly way in accordance with
the applicable national regulations.
More information at www.ifm-electronic.com
