Programming
For programming terminals 6 and 7 must be linked, e.g. by means of
a key switch.
Interrupt the supply voltage briefly so that the new parameters become
effective.
If no key is pressed during the programming process for approx. 15s,
the unit will change into the operating mode with unchanged para-
meter values.
Operation of the unit is maintenance-free.
P
P
P
1
2
3
4
5
Press briefly.
The parameter address is
displayed, decade 2 is flashing.
Press briefly
(= acknowledgement of
the parameter address).
The parameter value is displayed
(1st place is flashing).
Press briefly
(= acknowledgement of
the parameter value).
Changing into operating mode;
actual value is displayed.
Press this key to
increment in active decade.
Press this key to change
from one decade to the
other.
The active decade is flashing.
Press this key to
increment in active decade.
Press this key to change
from one decade to the
other.
The active decade is flashing.
