The adapter is delivered with
EPDM O-ring fitted.
O-rings are also available as
accessories:
- Order no. E30053
(5 pcs. Viton O-rings).
- Order no. E30054
5 pcs. EPDM O-rings).
Installation: Place the O-ring (A)
in the groove (B) of the adapter.
It must snap flush into the
groove over its whole
circumference.
• Remove the O-ring (C) sup-
plied with the sensor.
• Grease the following parts
with the supplied paste:
• Thread and sealing area of
the sensor.
• Sealing areas and O-ring (A)
of the adapter.
The greasing paste is food-
grade (USDA-H1 84-201).
• Screw the sensor into the
adapter. Avoid mechanical
influence on the sealing
chamfers.
B
A
A
C
I
Gr
ease
