6
USA
English
FCC information:
Model CANlink wireless 4003, Type 4003 (ifm article no.: CR3133)
U.S. Responsible Party
Proemion Corp.
241 Taylor St., Suite 301 / Dayton, Ohio 45402, Phone: +1 937 558 2211
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device must not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications to this device that have not been expressly
approved by ifm could void the user‘s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Info
