O Diagnostics
(diagnostics of the connected AS-i networks)
∇
Counting the AS-i voltage dips since power on of
the controller
e
∇
Counting the AS-i configuration errors since
power on of the controller
e
∇
Verify the fault rate of the AS-i messages of the
connected AS-i system
∇
Indication of the number of connected AS-i slaves
and the cycles per second
∇
List of the AS-i slaves with faulty messages since
power on of the controller
e
∇
Reset of the error counter
∇
Indication of the maximum system cycle time
∇
Reading the diagnostic information of Safety-at-
Work monitors
O Master Setup
(information on the AS-i master system)
∇
'Teach in' of the current AS-i configuration
(project all)
∇
Changeover to the projection mode:
configuration of the AS-i system
∇
Changeover to the protected mode:
normal operation (master monitors configuration)
∇
Enable the automatic AS-i slave addressing in the
protected mode
∇
Deactivation of the AS-i reset during the change
to the protected mode
O Fieldbus Setup
(Setting of the optional fieldbus interface)
∇
Setting of the device address of the controller
e
in
the higher-level fieldbus
∇
If necessary further settings of the higher-level
fieldbus
16