IFM Electronic AL1122, Operating Instructions Manual

Page: 50 / 111

50
ifm Operating Instructions IO-Link Master with EtherNet/IP interface StandardLine 8 Ports IP 65 / IP 67 (AL1122) 2017-05-31
Configuration
>
Acyclic port commands
12063
For the acyclic access to the configuration of the IO-Link ports of the AL1122, the following commands
are available:
Command Description Reference
Set mode Set the operating type of the IO-Link port
→
Command 0x10 – set mode
(
→ p.
82 )
Set Validation ID / Data Storage Adjust the supported IO-Link standard and
the behaviour of the IO-Link master when
connecting a new IO-Link device to the
IO-Link port
→
Command 0x20 – set validation ID / data
storage
(
→ p.
84 )
Set fail-safe data pattern Behaviour of the outputs when the
EtherNet/IP connection is interrupted and
setting of the corresponding fail-safe values
→
Command 0x30 – set fail-safe data pattern
(
→ p.
86 )
The port commands use the same mechanisms as the acyclic command channel (
→
Acyclic command
channel
(
→ p.
77 )).
>
EtherNet/IP mechanisms for acyclic commands
7102
Acyclic commands can be executed with the EtherNet/IP command
Message (MSG)
.
Parameters of the available field bus objects:
→
Field bus objects
(
→ p.
88 )
For detailed information about the
Message (MSG)
command:
→ Operating instructions
RSLogix 5000