10
5 Addressing
The address is set to 0 at the factory�
5.1 Addressing with the AC1154 addressing unit
When mounted and wired the module can be addressed with the addressing cable
(E70213) via the integrated addressing interface�
If a slave with the extended addressing mode (AC5204) is used in combination
with a master of the first generation (version 2�0), the parameter P3 must be 1 and
the output bit D3 must be 0*� The output bit D3 and the parameter bit P3 must not
be used�
* default setting
If a slave with the extended addressing mode is used in combination with a master
of the first generation (version 2�0), an address between 1A and 31A must be
assigned to this slave�
AC535A
4 inputs / 4 outputs
AS-i profile S-7�A�7 / extended addressing mode: yes / AUX
Data bit
D0
D1
D2
D3
Input
I1
I1
I3
I4
Socket
I-1/2
I-1/2
I-2
I-3/4
I-3/4
I-4
Output
O1
O2
O3
O4
Socket
O-1/2
O-1/2
O-2
O-3/4
O-3/4
O-4
Y-circuit inputs
Y-circuit outputs