Ÿ
Decide on the height of the vanity unit and use a spirit level to draw a horizontal
guideline (1).
Ÿ
Mark out the internal dimensions of the unit making sure the plates are within
the internal dimensions of the unit by 2-3 mm.
Ÿ
Using a cordless drill along with the wall plugs and screws provided, fix the
plates in place (2).
Ÿ
If the wall is not solid, you will need to use your own fixings. Ensure that they are
adequate to support the total weight of the unit as stated on the packaging.
Please read this leaflet carefully before attempting to fit the doors to the unit.
This leaflet contains information which must be made available to the end user.
Please check the product for imperfections before fitting the doors.
Contact your point of purchase if an imperfection is found.
Ÿ
Handle product with care.
Ÿ
When drilling walls, check first for hidden pipes and cables.
Ÿ
Use safety eyewear when drilling.
Ÿ
Keep all small parts away from children.
Ÿ
If the product is over 25 kg (see packaging), 2 people are required to
carry and install the unit.
General Safety Instructions
Fixings and Fittings Supplied
Tools Required (not supplied)
Ÿ
Posidrive Screwdriver
Ÿ
Power Drill, 2.5mm, 5mm Bits
x 1 per unit
(snap apart)
x 6
x 6
Ÿ
Level
Ÿ
Pencil
Ÿ
Tape
measure
Ÿ
Hammer
Step 1 - Wall Fixings
1
2