ATTACHING THE BASIN TO THE WALL
1) Use this checklist to ensure all parts are accounted for and not damaged.
Under no circumstances should this product be installed if any of the parts are missing or damaged. If there are any
installations issues please contact your nearest store.
Item
Description
Qty
1
Plastic Wall Plug
2
2
Stud Screw M8 x 110mm
2
3
Plastic Flanged Nut
2
Note: These fixings are suitable for solid walls. Plasterboard or stud walls may require specialized fixings (not supplied).
CAUTION – CARE SHOULD BE TAKEN WHEN DRILLING WALLS TO AVOID ANY SUNKEN WIRES OR PIPES
2) Drill two holes in the required position into the wall using a 12mm masonry drill bit to a depth of 60mm.
3) Push a wall plug (1) into each hole.
4) Scew a fixing bolt (2) into each wall plug (1) using a spanner on the flats near the centre of the fixing bolt (2) until the
spanner comes into contact with the wall.
5) Place the basin in position against the wall, with the bolt holes over the protruding fixing bolts (2).
6) Push the plastic washer nut onto each fixing bolt and screw clockwise.
7) Use a spanner to tighten the plastic flanged nut until the basin is secured.
PLEASE READ THESE INSTRUCTIONS PRIOR TO INSTALLATION.
3