All instructions, warranties and other collateral documents are subject to change at the sole discretion of IFLIGHT INNOVATION LIMITED.
For up-to-date product literature, visit www.iflight-rc.com and click on the support tab for this product.
NOTICE
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure
to operate the product correctly can result in damage to the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability.
Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This
product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this
product in any way outside of the instructions provided by IFLIGHT INNOVATION LIMITED. This manual contains instructions for
safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly,
setup or use, in order to operate correctly and avoid damage or serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy. Safety Precautions and Warnings
• Always keep a safe distance in all directions around your model to avoid collisions or injury.
This model is controlled by a radio signal subject to interference from many sources outside
your control. Interference can cause momentary loss of control.
• Always operate your model in open spaces away from
full-size vehicles, traffic and people.
• Always carefully follow the directions and warnings for
this and any optional support equipment (chargers, rechargeable battery packs, etc.).
• Always keep all chemicals, small parts and anything electrical out of the reach of children.
• Always avoid water exposure to all equipment not
specifically designed and protected for this purpose.
Moisture causes damage to electronics.
•
Never place any portion of the model in your mouth as it could cause serious injury or even death.
• Never operate your model with low transmitter batteries.
• Always keep aircraft in sight and under control.
• Always move the throttle fully down at rotor strike.
• Always use fully charged batteries.
• Always keep transmitter powered on while aircraft is powered.
• Always remove batteries before disassembly.
• Always keep moving parts clean.
• Always keep parts dry.
• Always let parts cool after use before touching.
• Always remove batteries after use.
• Never operate aircraft with damaged wiring.
• Never touch moving parts.
This product uses Betaflight Third Party Software in portions of its coding. For more information on Betaflight Software, please visit:
https://github.com/betaflight/betaflight/wiki.
THIRD PARTY SOFTWARE
: This product may include code developed by one or more third parties (“Third Party Software”). Some
Third Party Software may be subject to other terms and conditions that may be available for download with the product documentation.
Notwithstanding the terms and conditions of this Agreement, the Third Party Software is licensed to you subject to the terms and
conditions of the software license agreement identified in the open source software disclosure. If the third party terms and conditions
include licenses that provide for the availability of source code (such as the GNU General Public License), the open source software
disclosure or the media on which the software may be delivered will provide instructions where a copy of such source code can be obtained.
CINEBEE 75HD BNF DRONE
- Optional Receiver
- 4 x 1103 10000Kv FPV Motors
- SucceX Micro F4 Flight Controller
- SucceX 12A 4-in-1 ESC Dshot 600
- 25/100/200mW Adjustable Video Transmitter
- Caddx turtle V2 FPV Camera
- 1.6 inch 1.5mm hub Gemfan and HQ prop
- Battery Straps
CineBee 75HD
SPECIFICATION
Weight: 68g (without battery)
Motors: 1103 10000KV 2-3S
SucceX Micro F4 fly tower(w/12A 2-4S ESC+F4 FC+VTX 0-200mW)
Props: HQ prop 1.6" 4-Blades Prop
（
Gemfan 1.6" 3-Blades Prop
）
HD DVR Camera: CADDX Turtle V2
Receiver Option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire
Frame: CineBee 75HD Frame
Battery strap fits for micro 2S-3S battery
Flight time: 3 min 30 sec with 450mAh 3S battery
BOX CONTENTS:
Parts Explosion
Parts Listings
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1- Propeller
2- BeeMotor 1103
3- Prop guard
4- M2 screw
5- Camera board cover
6- Carbon fiber protective plate
7- M2 x25 standoff
8- 3D print camera mount
9- Caddx turtle V2 FPV Camera
10- Top plate
11- Receiver
12-3D print receiver holder
13- SucceX micro flytower
14- Flywoter adapter mount
15- Bottom plate
16- Caddx turtle V2 camera record board
