Step 17
To remove the logic board, two cylindrical
rods must be inserted into the holes
highlighted in red. Inserting instruments into
any logic board holes other than the ones
highlighted in red may destroy the logic
board.
Insert two tools having a maximum diameter of 2.5 mm
into the holes highlighted in red. Be sure they make
contact with the outer case below the logic board
before proceeding.
Carefully pry the tools toward the I/O board. The logic
board & I/O board assembly should slightly slide out of
the outer case.
Cease prying when the I/O board is visibly separated
from the outer case. Remove the two tools.
Step 18
Simultaneously push the two plastic clips on the far left
and right sides of the I/O board toward the middle of the
I/O board and pull the I/O board away from the outer
case.
Installing Mac mini Model A1347 IR Sensor
© 2010 iFixit — CC BY-NC-SA
www.iFixit.com
Page 9 of 14
