background image

Warranty 

 Warranty of the device’s good function provided, duration two (2) years from the purchase date, which includes any repair 
service and spare parts cost for malfunction that will come up because of building mistake or not appropriate material used.  

The warranty does ’t cover any breakdown that will possibly appear because of wrong use of the device, vandalism, hyper-
voltage of the electric power, force majeure (e.g. fire – earthquake etc.), not authorized repair attempt  as well as any other 

beyond structure imperfection or/and not appropriate material used. 

Finally, the warranty is limited only to the replacement/repair of the defective element and doesn’t cover losses (material or 
not) caused by this malfunction.  

Shipment of the device for repair in warranty, means implicitly acceptance of its terms. 

Any  shipment/delivery cost of the device for repair in warranty, burden the device’s owner. 
Any possible shipment for repair in warranty without actually having any malfunction on the device or in case the malfunc-

tion is not covered by the provided warranty the diagnosis cost burdens the owner of the device.  
 

Packaging– Transport

 

The Ethanol Burner is delivered fully packaged and comes with the following:  
1.Ethanol Burner  

2. 

Handle (Special Tool) that adjusts the flame 

3. 

Refilling Funnel 

4. 

Special Handle for Burner’s Placement 

5. 

Manual of safe Operation, Use & Maintenance  

6. 

Warranty brochure and warranty terms. 

   The initial packaging is advised to be preserved by the buyer for the whole duration of the burner usage. 
   Regarding the packaging selection, every possible action has been taken care of, so that the packaging protects the burner  
   from any possible damage through its transportation.  

Unpacking-Installation

 

To unpack the Burner, please follow the steps below: 

1. 

Using a sharp tool (scissors, knife, blade etc..) we remove the packaging. 

2.

 Take out the content of the box and check from the provided list enclosed the packaging, that all the expected material are available. 

3. 

Read carefully the Instructions of Installation, Safety and Functions and keep the provided manual for future use. 

    We choose the spot that we are going to place the burner according to the manual’s reference . 

4. 

We place the burner and provide fuel according to the manual’s reference. (See Pages 9-10) 

5. 

Set the burner in function. 

 

Safety  Instructions 

     Ethanol 
The Ethanol is a colorless, flammable liquid with chemical type C

2

H

6

O. 

 

 Burner 

The Ethanol Burner is designed and manufactured with standards its function firstly, and its safe function for the man in  

the  environment that will be placed. 
It is addressed to the common user and doesn’t require special care from him during its operation.   

Read and comprehended the safety precautions before operating the burner. Mentioned all you should know about its proper 
and safe function.  

Save this for future reference. 
Any omission of the safe usage precautions and operation can lead to an accident or damage.  

Summary of Contents for CRM 43













Reviews: