PROGRAMME RUN
Note:
q
During the programme run the knob turns automatically in the clockwise
direction only. Manual setting/advancement should not be done during
programme run.
q
Washing, Soaking Rinsing and Spinning can be seen through the porthole
door.
q
At any moment the position of the knob with respect to its start position
shows how far the programme has advanced.
q
The starting point is just beyond the thick line on the Facia.
SWITCHING OFF THE MACHINE
q
The wash ends automatically at the end of each programme at the thick line.
q
To switch the machine OFF release the START button.
q
The indicator lamp goes off.
q
Porthole door can be opened after 90 seconds of switching off the machine.
q
Remove clothes from inside the machine
q
Leave door slightly ajar to dry out the inside of the machine.
CHECK POINTS
Before switching your machine ‘ON’ check...
q
The machine is plugged in and switched on to a 220V, 50 Hz supply with
proper earthing.
q
The water inlet stopcock is fully open.
q
The hoses are not bent or twisted.
q
Dry clothes are loaded into the machine drum, and door is closed firmly
with a ‘click’.
q
The required amounts of detergents and fabric conditioner are filled in their
respective compartments.
q
The Water Save Device Button, Rinse Hold Button, soak button, Eco button,
is pressed if required.
q
The spin speed selector knob is turned to Appropriate position.
q
The programme Selector knob is turned to the appropriate programme
position in a
clockwise direction only.
This is very important.
q
The Coin Trap/ drain hose is not open.
q
Start Button is pressed.
21
Summary of Contents for Senator
Page 29: ...28...
