IFB 28QOLCD1, Manual

Page: 15 / 22

Chapter 4 The A to Z of your Quartz oven
T R O U B L E S H O O T I N G G U I D E
E R R O R C O D E & P O S S I B L E
C A U S E S
E1
ERROR CODE
Possible Causes:
The temperature does not rise more than 5ºC after 3 min of
power ON.
E2
ERROR CODE
Possible Causes:
The terminal of the temperature sensor is loose or the tempera-
ture sensor is damaged.
E3
ERROR CODE
Possible Causes:
The sensor temperature is higher than 260°C
P R O B L E M
S O LU T I O N
Refer to 'Cleaning & Maintenance'. Food build-up inside
the oven, on heating elements and in the crumb tray can
sometimes cause a burnt smell.
Oven does not turn ON
Smoke or odour
Plug the oven into the electrical outlet.
Check that the power plug is securely inserted into the
outlet.
Insert the power plug into a different outlet.
Press the START button.
During initial use of this appliance, slight smoke and/or
odour may be detected. This is normal with heating
appliances and will not recur after a few uses.
Press the LIGHT button.
Change light bulb.
Make sure that the correct function has been selected.
The heating elements will cycle ON and OFF to maintain
proper heat.
Because this oven is smaller than a regular oven, it will
heat up faster and generally cook in short span of time.
The rack may be adjusted to accommodate different foods.
Oven light does not turn ON
Heating elements do not stay ON
Adjust the time and temperature settings.
Overcooked/undercooked food
Burnt smell
Press any button to wake up the appliance. The LCD screen
turns off after 90 secs of inactivity.
LCD display turns OFF
12
Remove all accessories from the oven.
Remove the cover of the interior light bulb by turning it
counterclockwise and remove the bulb.
Insert a new l 8Wl 20VG9 bulb as per instructions on the light
bulb's package. Replace the interior light bulb cover, turning
clockwise to tighten.
This should be done when the oven has been OFF for a while
and is no longer hot.
Note :