iFan IF505 Manual Download Page 10

c. 

Place and use the appliance on a horizontal, stable and dry surface. Damage 
may occur if the appliance is placed on an incline or decline.  

d. 

Assemble the appliance fully before plugging it into the wall socket. 

e. 

To turn ON : Press the Speed Button to the fan speed (Low – ‘1 / 2 / 3 / 4’ – 
High) you desire. 

f. 

(optional)  Select  the  desired  time  for  the  appliance  to  be  in  operation 
between  0  to  120  minutes  if  you  wish.  Rotate  the  Timer  knob  clockwise  to 
your desired time duration.  

g. 

Tilt the Fan Head or Grille upwards or downwards to the desired position to 
adjust the angle of the fan. 

h. 

Pushing down the Swing Button on the Fan Head will make the fan oscillate 
side  to  side,  sweeping  an  arc  across  the  room.  To  stop  the  fan  from 
oscillating, pull up the Swing Button on the Fan Head. 

i. 

To turn OFF : Press the ‘0’ Speed Button. 

j. 

Make  sure  to  remove  any  label  or  protective  sheet  which  may  prevent  its 
proper functioning. 

DO NOT:  

 

cover the appliance during functioning;                                                                                                                                                                                                                                                                                      

 

insert objects or body parts (including clothing and hair) inside the protection 
cover  of  the  appliance  to  avoid  personal  injury  or  damage  to  the  machine 
when the appliance is in operation; 

 

attempt to force the fan blades to turn; 

 

touch  the  inside  of  the  fan  while  it  is  operating.  The  blades  are  rotating  at 
very high speeds, which may lead to injury to your fingers and hands; 

 

push the Speed Control Buttons too forcefully; 

 

use the appliance near curtains or textiles; 

 

use any of the following agents as a cleaner: gasoline, thinners, or benzene; 

 

operate the appliance for more than 6

 

hours without turning it off for at least 

30 minutes to let the appliance cool down for a total usage of 12

 

hours a day 

– failure to heed this warning may result in motor failure; 

 

leave the appliance unsupervised during operation. 

17. 

During  operation,  DO  NOT  touch  the  appliance  with  wet  body  parts,  and  it  is 
recommended  to  have  between  you  and  the  standing  surface,  an  isolating 
element (for example, wearing shoes with rubber soles). 

18. 

DO NOT soak the Motor Unit in water or other liquids, wash it under the tap, or 
let  any  liquid  flow  into  the  internal  casing  of  the  appliance  to  prevent  electric 
shock.  In  case  of  accidental  fall  in  water,  DO  NOT  try  to  take  it  out,  but  first 
switch the appliance off.  

19. 

Plug and unplug the power cable firmly holding it with dry hands. Always unplug 
the power cable to avoid overheating and avoid stretching it (DO NOT pull it, tug 
it or use it to drag the appliance to which is connected). Before unplugging the 

Summary of Contents for IF505

















Reviews: