IER 680 Handheld RF Reader Terminal
User Guide
Page 10
N0F502B Rev. 2
Aug. 1, 2013
This document is the property of IER and may not be reproduced or
communicated without prior written authorization
When battery is low, insert fully charged new battery or recharge the IER
680 with the cradle bay.
To charge the
IER 680
with the cradle bay, proceed as follows:
- Connect the charger cradle (1) power cable to the AC power outlet.
- Insert the
IER 680
into one of the cradle bays (2).
To charge a battery with the cradle bay, proceed as follows:
- Connect the charger cradle (1) power cable to the AC power outlet.
- Insert the battery (3) into one of the battery charging slots (4).
At the right of each charging slot, a LED (5) shows the charging status:
•
Red: charging,
•
Green: fully charged.
- When the battery is fully charged (the LED (5) is green), pull the lock
button (6) and remove the battery.
