iEmmet MP-312, User Manual

Page: 6 / 8

There are 2 brightness modes when using battery power, normal and save mode
(default). To choose normal mode, press the up arrow on the projector for 3 seconds
and enter the setup menu to choose Power – Power management. Or press Menu
button” ” on the remote control to realize this step. Choose normal or save mode
with right arrow on the projector or remote control. Press Enter button to confirm.
9 Adjust the brightness when using battery power
Menu
Choose
n
ormal
m
ode Default save m ode
10 Battery charging, connecting and safety
The projector comes with a high capacity rechargeable lithium-ion battery. Confirm the
remaining capacity of the battery before using. Charge the projector or connect with a
19V DC power adapter when the battery capacity is low. It takes about 3 hours to fully
charge the projector. The battery can be fully re-charged at least 500 times, but after
long-term use the battery performance will begin to decline.
10.1 Lithium-ion battery weight: 199g.
10
.
2
The battery life in normal mode can reach 130 minutes when fully charge, and 240
minutes in save mode.
10
.
3 Refer to 4. ( ~ ) battery indication.
10
.
4 Confirm the positive and negative side of the battery. Inserting the battery and
reinstalling the cover as illustrated
:
battery
cover
Power management
Normal
Save mode
Exit
：
MENU Move
：
Select
Power management
Power management
Normal
Save mode
Exit
：
MENU Move
：
Select
Power management
battery
cover
battery
13 16