IEMCA KID 80, Manual For Use And Maintenance

Page: 53 / 82

6 - USE AND OPERATION KID 80
EN
6 - Pag. 3 / 14
6.2 CONTROL DESCRIPTION
The figure represents the control position on board the machine.
1) Main switch; to turn power supply on and off.
- 0 (OFF) power supply is off.
- I (ON) power supply is on.
2) Bar feeder Start button (green light); press this button to start the bar feeder. Press the
button and hold it down until it lights up. Press it rapidly twice to perform the "Bar feeder
zero setting".
3) Bar feeder Stop button (red light); press this button to stop the bar feeder.
4) Emergency stop button; to stop the bar feeder under emergency conditions; you will have to
manually release this button before restarting the bar feeder.
5) Manual Mode Button (white light); press this button to select manual mode.
6) Automatic mode button (white light); press this button to select automatic mode.
7) Bar pusher feeding and return selector switch; turn selector switch to allow bar pusher
motion in manual mode.
8) Selector switch for selecting unit - guide channel - bar drop control device - bar pusher; turn
selector switch to manual mode.