Print More Materials, All For Application
31
7.Common Problems and Their Solutions
Only a few common problems are listed, for more questions please contact the technician directly.
7.1 Movement
Problem
Solution
Problem 1: When extruding, the extrusion gear
shake.
Increase the print head temperature or determine if
the head is clogged or needs to be reloaded with
material.
Problem 2: One or two of the X, Y, Z and E axes
cannot be moved, and an alarm sound appears
when you click to move
Check if the limit switch is pressed
Problem 3: Opposite direction of motion
Open the firmware and change the control code 1
or -1
