IEM Libr-O-Graph Med, Operating Instructions Manual, Page: 35 / 130

Fault
descrip-
tion Cause Remedy
‘E010’ No saved measurements for sen-
ding or target telephone number not
saved Try it again. If the error continues, contact the manufacturer.
‘E011’ No serial number saved Try it again. If the error continues, contact the manufacturer.
‘E012’ Measurement value memory incon-
sistent Try it again. If the error continues, contact the manufacturer.
‘E013,
E014’
Measurement value from mobile
telephone or BT terminal could not
be sent Try again:

Switch on Bluetooth at the mobile telephone

Check battery voltage of mobile phone

Check network access at mobile telephone
If the error continues, contact the manufacturer.
‘2402’ Calibration data lost Send the scales to the manufacturer.
‘bAtt’ Batteries empty Replace the batteries with new ones ( Ä Chapter 8 ‘Battery
change’ on page 30 )
10 Error messages of the scales
GB
35