14
Front panel elements are shown in the Figure 1.
1 –
3
½
digits LCD, height of characters is
12.7 mm. Display shows
measurement results in digital form.
2 –
Rotary range switch is used to select the functions and the limit of
measurement, as well as to enable/disable the device. The multimeter does not
operate when the switch is in the "OFF" position.
3 –
Jack for hFE transistor amplification gain measurement.
4 –
"10
A" input jack for connection of the positive polarity probe when
measuring current up to 10
A.
5 –
«V
W
mA» input jack to connect the positive polarity probe when measuring
the voltage, resistance, current strength up to 200 mA.
6 –
"COM" input jack to connect the negative polarity probe.
Figure 1 – Multimeters front panel elements
1
2
4
5
6
3
