IEI Technology WSB-Q354 User Manual Download Page 133

Page: 133 / 205

WSB-Q354 PICMG 1.0 CPU Card

Page 118

one FDD is connected only “

1st Drive

” is listed.

The boot sequence from the available devices is selected. If the “

1st Drive

” option is

selected a list of available FDDs is shown. Select the first FDD the system boots from. If

the “

1st Drive

” is not used for booting this option may be disabled.

6.6 Security

Use the

Security

menu (

BIOS Menu 19

) to set system and user passwords.

BIOS Menu 19: Security

Change Supervisor Password

Use the

Change Supervisor Password

to set or change a supervisor password. The

default for this option is

Not Installed

. If a supervisor password must be installed, select

this field and enter the password. After the password has been added,

Install

appears

next to

Change Supervisor Password

Summary of Contents for WSB-Q354














































































































































































































Search results

Summary of Contents for WSB-Q354

Reviews:

Brands by name

Popular brands

IEI Technology WSB-Q354, User Manual

Search results

Summary of Contents for WSB-Q354

Reviews:

Brands by name

Popular brands