manualshive.com logo in svg

IEI Technology WAFER-US15WP, User Manual

Share
Download
IEI Technology WAFER-US15WP User Manual Download Page 12

 

 

WAFER-US15WP 3.5" SBC 

Page 2 

1.1 Introduction 

 

Figure 1-1: WAFER-US15WP 

The WAFER-US15WP is a 3.5" SBC with a 1.1 GHz Intel® Atom™ Z510P or 1.6 GHz 

Intel® Atom™ Z530P CPU. 

The WAFER-US15WP is designed for fanless operation. The low power CPUs don't 

require active cooling and stay within specified heat range using the included cooling 

solution. 

Storage on the board is handled by an IDE port for connecting a hard drive, optical drive or 

SSD. The CompactFlash® slot on the underside allows a Type I/II CompactFlash® card to 

be installed. 

The board has two graphics outputs. A VGA output connects to a traditional VGA monitor 

and the LVDS connector is for an LCD panel. 

Other slots and connectors include a PCIe Mini cards slot, RS-232, RS-232/422/485, 

Gigabit Ethernet, audio input and output and digital I/O. 

1.2 Benefits 

Some of the WAFER-US15WP motherboard benefits include, 

Summary of Contents for WAFER-US15WP































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands