IEI Technology WAFER-PV-D5253, User Manual

Page: 75 / 140

WAFER-PV-D5253/D4253/N4553 SBC
Page 61
Step 2: Align the VGA connector . Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
WAFER-PV-D5253/D4253/N4553. See Figure 4-20.
Figure 4-20: VGA Connector
Step 4: Secure the connector . Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector. Step 0:
4.9 Software Installation
All the drivers for the WAFER-PV-D5253/D4253/N4553 are on the CD that came with the
system. To install the drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.