IEI Technology WAFER-OT-Z650, User Manual

Page: 41 / 156

WAFER-OT-Z650/Z670 3.5" Motherboard
Page 28
3.3.2 Ethernet Connector
CN Label: LAN1
CN Type: RJ-45 connector
CN Location: See Figure 3-16
CN Pinouts: See Table 3-17
The WAFER-OT-Z650/Z670 is equipped with a built-in RJ-45 Ethernet controller. The
controller can connect to the LAN through a RJ-45 LAN connector. There are two LEDs on
the connector indicating the status of LAN. The pin assignments are listed in the following
table:
Pin Description Pin Description
1 LA 5 LA
2 LAN1_MDI0- 6 LAN1_MDI2-
3 LA 7 LA
4 LAN1_MDI1- 8 LAN1_MDI3-
Table 3-17: LAN Pinouts
Figure 3-17: RJ-45 Ethernet Connector
The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green
LED indicates activity on the port and the yellow LED indicates the port is linked. See
Table 3-18 .
Status Description Status Description
Green Activity Yellow Linked
Table 3-18: RJ-45 Ethernet Connector LEDs