IEI Technology WAFER-KBN-i1, Quick Installation Manual

Page: 3 / 17

2

Super IO: Fintek F81866

EC: iWDD

Digital I/O: 8-bit digital I/O (4-bit input / 4-bit output)

Audio:
Realtek ALC892HD audio codec
1 x SPDIF by 4-pin (1x4) header for digital audio
1 x Analog audio by 10-pin (2x5) header

I/O Interface:
1 x RS-232 on rear I/O
2 x RS-232 by pin header
1 x RS-422/485
2 x USB 3.2 Gen 1 (5Gb/s) on rear I/O
4 x USB 2.0 by pin header
1 x 6-pin wafer for PS/2 KB/MS
2 x SATA 6Gb/s with 5V SATA power connector (No RAID)

Watchdog Timer:
Software programmable, supports 1~255 sec. system reset

Fan:
1 x 4-pin CPU fan connector

SMBus: 1 x 4-pin (1x4) wafer

I
2
C: 1 x 4-pin (1x4) wafer

LAN LED: 2 x 2-pin (1x2) header for LAN1 LED & LAN2 LED

Front Panel:
1 x 6-pin (1x6) wafer for power LED & HDD LED
1 x 2-pin (1x2) wafer for power button
1 x 2-pin (1x2) wafer for power reset button

Expansion:
1 x Full-size PCIe Mini card slot with mSATA support (SATA2
and mSATA shares SATA signal)

IPMI: 1 x PCIe Mini slot supports iRIS-1010

Power Supply:
12V only, AT/ATX mode supported