manualshive.com logo in svg

IEI Technology WAFER-KBN-1, User Manual

Share
Download
IEI Technology WAFER-KBN-1 User Manual Download Page 94

 

 

WAFER-KBN-i1 3.5" SBC

Page 80 

5.3.5 USB Configuration 

Use the 

USB Configuration

 menu (

BIOS Menu 8

) to read USB configuration information 

and configure the USB settings.

 

Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 

USB Configuration 
 
USB Module Version 

8.10.26 

 
USB Devices: 
        1  Keyboard 

 
Legacy USB Support 

[Enabled] 

 

 
Enables Legacy USB 
support. AUTO option 
disables legacy support 
if no USB devices are 
connected. DISABLE 
option will keep USB 
devices available only 
for EFI applications. 
 
--------------------- 

: Select Screen 

↑

 

↓

: Select Item 

Enter: Select 
+/-:  Change  Opt. 
F1: General 

Help 

F2: Previous 

Values 

F3: Optimized 

Defaults

F4:  Save & Exit 
ESC: Exit 

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc. 

BIOS Menu 8: USB Configuration

 

 USB 

Devices 

The 

USB Devices 

field lists the USB devices that are enabled on the system 

  Legacy USB Support [Enabled] 

Use the 

Legacy USB Support

 BIOS option to enable USB mouse and USB keyboard 

support. 

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not 

become available until a USB compatible operating system is fully booted with all USB 

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard 

can control the system even when there is no USB driver loaded onto the system. 

Summary of Contents for WAFER-KBN-1











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands