IEI Technology WAFER-BT, User Manual

Page: 90 / 114

WAFER-BT
P a g e 78

Disabled Disables the Intel Speed Step Technology.

Enabled D
EFAULT
Enables the Intel Speed Step Technology.
5.3.7 IDE Co n fig u ra tio n
Use the IDE Configuration menu ( BIOS Menu 12 ) to change and/or set the configuration
of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.
Advanced
IDE Configuration
SATA Mode [AHCI Mode]
Serial-ATA Port 1
[Enabled]
SATA Port 1 HotPlug [Disabled]
Serial-ATA Port 0 [Enabled]
SATA Port 0 HotPlug [Disabled]
SATA Port1
Not Present
SATA Port0
Not Present
Select IDE/AHCI
---------------------

: Select Screen
↑ ↓
: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4
Save
ESC Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
BIOS Menu 12: IDE Configuration

S ATA Mo d e [ACHI Mo d e ]
Use the SATA Mode option to configure SATA devices as normal IDE devices.

IDE Mode
Configures SATA devices as normal IDE device.

ACHI Mode D
EFAULT
Configures SATA devices as AHCI device.

S e ria l-ATA P o rt 1/0 [En a b le d ]
Use the Serial-ATA Port 1/0 option to enable or disable the SATA device.

Disabled Disables the SATA device.

Enabled D
EFAULT
Enables the SATA device.