IEI Technology WAFER-BT, User Manual

Page: 60 / 114

WAFER-BT
P a g e 48
Figure 4-4: LVDS Panel Resolution Selection Switch Location
4.4.4 LVDS Vo lta g e S e le c tio n
WARNING:
Permanent damage to the screen and WAFER-BT may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that came with the monitor to select the correct voltage.
J u m p e r La b e l: J_LCD_PWR1
J u m p e r Typ e : switch
J u m p e r S e ttin g s : See Table 4-4
J u m p e r Lo c a tio n : See Figure 4-5
The LVDS voltage selection jumper allows setting the voltage provided to the monitor
connected to the LVDS connector.
Setting Description
Short A-B +3.3V (Default)
Short B-C +5V
Table 4-4: LVDS Voltage Selection Jumper Settings