IEI Technology WAFER-AL, User Manual

Page: 72 / 139

WAFER-AL SBC
Page 58
4.7.2 Clear CMOS Button
CN Label: J_CMOS1
CN Type: Button
CN Location: See Figure 4-13
If the WAFER-AL fails to boot due to improper BIOS settings, use the button to clear the
CMOS data and reset the system BIOS information. To clear the CMOS, disconnect the
battery (BT1) and press the clear CMOS button for about 3 seconds.
The location of the clear CMOS button is shown in Figure 4-13
Figure 4-13: Clear CMOS Button Location