IEI Technology WAFER-945GSELVDS2-N270-R10, User Manual

Page: 49 / 140

WAFER-945GSELVDS2
Page 37
3.4.1 LAN Connectors
CN Label: LAN1
CN Type: RJ-45
CN Location:
See Figure 3-22
CN Pinouts:
See Table 3-23
The WAFER-945GSELVDS2 is equipped with two built-in RJ-45 Ethernet controllers. The
controllers can connect to the LAN through two RJ-45 LAN connectors. There are two
LEDs on the connector indicating the status of LAN. The pin assignments are listed in the
following table:
Pin Description Pin Description
1 MDIA3- 5 MDIA1+
2 MDIA3+ 6 MDIA2+
3 MDIA2- 7 MDIA0-
4 MDIA1- 8 MDIA0+
Table 3-23: LAN Pinouts
Figure 3-23: RJ-45 Ethernet Connector
The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green
LED indicates activity on the port and the yellow LED indicates the port is linked. See
Table 3-24 .
STATUS DESCRIPTION STATUS DESCRIPTION
Green Activity Yellow Linked
Table 3-24: RJ-45 Ethernet Connector LEDs