35
Serial Port2
Î
The options are Disable, 3F8, 2F8,
3E8, 2E8 and Auto. You can set the I/O address of
the serial port 2 ( COMB) or disable it.
On-board Parallel Port
Î
The options are Auto,
Disable, 3BC, 378 or 278. You can set the I/O
address of the parallel port or disable it.
Parallel Port Mode
Î
WAFER-4823 provides EPP,
ECP, ECP/EPP, and SPP/BPP Mode. EPP passes
the parallel port to be used with devices which stick to
the EPP specification. The existing parallel port
signals will be used by EPP to provide asymmetric bi-
directional data transfer driven by the host devices.
ECP passes the parallel port to be used with devices
which stick to the ECP specification.
Parallel Port IRQ
Î
to define the Interrupt Request
(IRQ) which is used by the parallel port.
Parallel Port DMA Channel
Î
to set the DMA
Channel used by the parallel port.
4.6
Auto-Detect Hard Disk
This option detects the parameters of an IDE hard
disk drive (HDD sector, cylinder, head, etc)
automatically and will put the parameters into the
Standard CMOS Setup screen. Up to 4 IDE drives can
be detected and the parameters will be listed in the
box. Press <Y> if you accept these parameters. Press
<N> to skip the next IDE drives.