IEI Technology UPC-F12C-ULT3, User Manual

Page: 70 / 114

UPC-F12C-ULT3 Panel PC
Page 56

Detect Non-Compliance Device [Disabled]
Use the Detect Non-Compliance Device option to enable or disable detecting if a
non-compliance PCI Express device is connected to the PCI Express slot.

Disabled D
EFAULT
Disables to detect if a non-compliance PCI
Express device is connected to the PCI Express
slot.

Enabled
Enables to detect if a non-compliance PCI Express
device is connected to the PCI Express slot.
4.5 Security
Use the Security menu ( BIOS Menu 22 ) to set system and user passwords.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be:
Minimum length
3
Maximum length 20
Administrator Password
User Password
Set Administrator
Password
---------------------

: Select Screen
↑ ↓
: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4
Save
ESC Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 22: Security

Administrator Password
Use the Administrator Password to set or change a administrator password.

User Password
Use the User Password to set or change a user password.