IEI Technology TUS3400, User Manual

Page: 22 / 32

TUS3400
Page 22
Step 4: Grasp the SO-DIMM module by the edges and carefully pull it out of the
socket.
Step 5: Install the new SO-DIMM module by pushing it into the socket at an angle
(Figure 4-1).
Step 6: Gently push the rear of the SO-DIMM module down (Figure 4-1). The spring
retainer clips clip into place and secure the SO-DIMM module in the
socket.
Figure 4-1: SO-DIMM Module Installation
Step 7: Push the new DIMM module until it engages and the white plastic end clips