IEI Technology TRN-TABLET3, User Manual

Page: 22 / 71

TRN-TABLET3
Page 12
3.1 Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
 To prevent the risk of electric shock, make sure power cord is
unplugged from wall socket. To fully disengage the power to the unit,
please disconnect the power cord from the ac outlet. Refer servicing to
qualified service personnel. The AC outlet shall be readily available and
accessible.
 Follow the electrostatic precautions outlined below whenever the
TRN-TABLET3 is opened.
 Make sure the power is turned off and the power cord is disconnected
whenever the TRN-TABLET3 is being installed, moved or modified.
 Do not apply voltage levels that exceed the specified voltage range .
Doing so may cause fire and/or an electrical shock. Use a power cord that
matches the voltage of the power outlet, which has been approved and
complies with the safety standard of your particular country.
 Electric shocks can occur if the TRN-TABLET3 chassis is opened when the
TRN-TABLET3 is running. To avoid risk of electric shock, this equipment must
only be connected to a supply mains with protective earth.
 DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW 0°C
(32°F) OR ABOVE 60°C (140°F). IT MAY DAMAGE THE EQUIPMENT.
 Do not drop or insert any objects into the ventilation openings of the
TRN-TABLET3.
 If considerable amounts of dust, water, or fluids enter the TRN-TABLET3 ,
turn off the power supply immediately, unplug the power cord, and contact the
TRN-TABLET3 vendor.
 DO NOT :
o
Drop the TRN-TABLET3 against a hard surface.
o
Strike or exert excessive force onto the LCD panel.
o
Touch any of the LCD panels with a sharp object
o
In a site where the ambient temperature exceeds the rated temperature