IEI Technology TRN-3200T, User Manual

Page: 22 / 70

TRN-3200T-R100 Tablet PC
Page 12
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
TRN-3200T may result in permanent damage to the TRN-3200T and
severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the TRN-3200T. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the TRN-3200T is accessed internally, or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband
: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding
: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad
: - When configuring the TRN-3200T, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
TRN-3200T.

Only handle the edges of the PCB
: - When handling the PCB, hold the PCB
by the edges.
3.2 Installation Precautions
When installing the TRN-3200T, please follow the precautions listed below:

Power turned off
: When installing the TRN-3200T, make sure the power is
off. Failing to turn off the power may cause severe injury to the body and/or
damage to the system.

Certified Engineers
: Only certified engineers should install and modify
onboard functionalities.