IEI Technology TDM-121GMS, User Manual

Page: 21 / 79

TDM Series Monitor
Page 7
1.2.3 Top View
The top view provides access to retention screws that secure the back cover to the
chassis. The retention screw holes are circled in
Figure 1-3
below.
Figure 1-3: Top View
1.2.4 Bottom View
The bottom view provides access to retention screws that secure the back cover to the
chassis. The retention screw holes are circled in
Figure 1-4
below.
Figure 1-4: Bottom View
1.2.5 Side View
The rear panel shown in
Figure 1-5
has the following interfaces. See
Section 5.4.1
for the
connector locations.
ƒ 1 x RS-232 connector touch screen interface
ƒ 1 x USB connector touch screen interface
ƒ 1 x 9~36V DC terminal block
ƒ 1 x 12V DC input connector
ƒ 1 x VGA connector
ƒ 1 x DVI-D connector