IEI Technology TANK-XM811, User Manual

Page: 35 / 71

TANK-XM811
Page 25
Step 3:
Secure the brackets to the system by inserting retention screws into each
bracket ( Figure 3-11 ).
Figure 3-11: Mounting Bracket Retention Screws
Step 4:
Drill holes in the intended installation surface.
Step 5:
Align the mounting holes in the sides of the mounting brackets with the
predrilled holes in the mounting surface.
Step 6:
Insert four retention screws, three in each bracket, to secure the system to
the wall.
3.9 External Peripheral Interface Connectors
The TANK-XM811 Series has the following connectors. Detailed descriptions of the
connectors can be found in the subsections below.

AT/ATX power mode switch