IEI Technology TANK-XM810 Series, User Manual

Page: 22 / 132

Page 10
TANK-XM810
2.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the TANK-XM810 Series and severe injury to
the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the TANK-XM810 Series. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the TANK-XM810 Series or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : When configuring the TANK-XM810 Series, place it
on an antic-static pad. This reduces the possibility of ESD damaging the
TANK-XM810 Series.
2.2 Unpacking Precautions
When the TANK-XM810 Series is unpacked, please do the following:

Follow the anti-static precautions outlined in Section 2.1 .

Make sure the packing box is facing upwards so the TANK-XM810 Series
does not fall out of the box.

Make sure all the components shown in Section 2.2 are present.