IEI Technology TANK-871-Q170i Series User Manual Download Page 85

Page: 85 / 130

TANK-871-Q170i Embedded System

Page 71



Disabled

EFAULT

Disables the Intel® Trusted Execution

Technology.



Enabled

Enables the Intel® Trusted Execution

Technology.

5.3.2 USB Configuration

Use the

USB Configuration

menu (

BIOS Menu 14

) to read USB configuration

information and configure the USB settings.

Advanced

USB Configuration

USB Devices:
1 Keyboard

Legacy USB Support

[Enabled]

Enables Legacy USB
support. AUTO option
disables legacy support
if no USB devices are
connected. DISABLE
option will keep USB
devices available only
for EFI applications.

---------------------



: Select Screen

↑

↓

: Select Item

Enter

Select

+/-: Change Opt.
F1:  General Help
F2:  Previous Values
F3:  Optimized Defaults
F4:  Save & Exit
ESC: Exit

BIOS Menu 14: USB Configuration



USB Devices

The

USB Devices

field lists the USB devices that are enabled on the system



Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support. Normally if this option is not enabled, any attached USB mouse or USB keyboard

does not become available until a USB compatible operating system is fully booted with all

Summary of Contents for TANK-871-Q170i Series



































































































































Search results

Summary of Contents for TANK-871-Q170i Series

Reviews:

Related manuals for TANK-871-Q170i Series

Brands by name

Popular brands

IEI Technology TANK-871-Q170i Series, User Manual

Search results

Summary of Contents for TANK-871-Q170i Series

Reviews:

Related manuals for TANK-871-Q170i Series

Brands by name

Popular brands