IEI Technology TANK-871-Q170i Series, User Manual

Page: 32 / 130

TANK-871-Q170i Embedded System
Page 18
Step 4: Secure each HDD with the HDD bracket by four retention screws (eight in all).
Figure 3-4: HDD Retention Screws
Step 5: Secure the HDD bracket with the system by the four retention screws that were
previously removed.
Step 6: Reinstall the bottom panel to the TANK-871-Q170i series.
3.3 Memory Module Replacement
The TANK-871-Q170i series support two 260-pin DDR4 SDRAM SO-DIMM modules up to
64 GB (4GB memory preinstalled). If the memory module fails, follow the instructions
below to replace the memory module.
Step 1: Remove the bottom panel by removing the eight retention screws from the
bottom panel. See Figure 3-1.
Step 2: Locate the DDR4 SO-DIMM on the motherboard. See Figure 4-1.
Step 3: Remove the DDR4 memory module by pulling both the spring retainer clips
outward from the socket.
Step 4: Grasp the DDR4 memory module by the edges and carefully pull it out of the
socket.