IEI Technology TANK-801, User Manual

Page: 36 / 98

TANK-801 Em b e d d e d S ys te m
P a g e 26
Figure 3-14: DIO Connector Pinout Location
Figure 3-15: RJ-45 to DB-9 Cable (P/N: 32005-000200-200-RS)
Pin Description (RJ-45) Description (DB-9)
1 DOUT3 DIN0
2 DOUT2 DIN2
3
DOUT1 DOUT0
4 DOUT0 DOUT2
5 DIN3 N/A
6 DIN2 DIN1
7 DIN1 DIN3
8 DIN0 DOUT1
9 N/A DOUT3
Table 3-1: DIO Connector Pinouts
3.7.6 Dis p la yP o rt Co n n e c to r
The DisplayPort connector transmits a digital signal to compatible DisplayPort display
devices such as a TV or computer screen. To connect the DisplayPort cable to the
TANK-801, follow the steps below.
S te p 1:
Locate the DisplayPort connector . The location is shown in Chapter 3 .
S te p 2: Align the connector. Align the DisplayPort connector with the DisplayPort port.
Make sure the orientation of the connector is correct.