manualshive.com logo in svg

IEI Technology TANK-801-BT, User Manual

Share
Download
IEI Technology TANK-801-BT User Manual Download Page 77

 

 

TANK-801 Em b e d d e d  S ys te m  

P a g e   65 

4.3.9

 

Tru s te d   Co m p u tin g  

Use the 

Trusted Computing

 menu (

BIOS Menu 14

) to configure settings related to the 

Trusted Computing Group (TCG) Trusted Platform Module (TPM). 

Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 

Configuration 
  

Security Device Support 

[Disable]

 

 

Current Status Information 
  NO Security Device Found

  

 
Enables or Disables BIOS 
support for security 
device. O.S. will not 
show Security Device. 
TCG EFI protocol and 
INT1A interface will not 
be available.  
---------------------- 



: Select Screen 

↑

 

↓

: Select Item 

Enter 

Select 

+/-: Change Opt. 
F1:  General Help 
F2:  Previous Values 
F3:  Optimized Defaults 
F4:  Save & Exit 
ESC: Exit 

Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc. 

BIOS Menu 14: TPM Configuration

 

 

S e c u rity  De vic e  S u p p o rt  [Dis a b le ] 

Use the 

Security Device Support

 option to configure support for the security device. 

 

Disable  D

EFAULT

 

Security device support is disabled. 

 

Enable 

 

Security device support is enabled. 

Summary of Contents for TANK-801-BT

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands