IEI Technology TANK-610-BW, User Manual

Page: 29 / 98

TANK-610-BW Em b e d d e d S ys te m
P a g e 19
3.5 Mo u n tin g th e S ys te m
There are two ways to mount the TANK-610-BW. The mounting instructions are described
below.
3.5.1 Mo u n tin g with Mo u n tin g Bra c ke ts
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
S te p 1: Turn the embedded system to the bottom panel.
S te p 2: Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the bottom panel ( Figure 3-10 ).
Figure 3-10: Mounting Bracket Retention Screws
S te p 3:
Secure the brackets to the system by inserting two retention screws into each
bracket ( Figure 3-10 ).
S te p 4: Drill holes in the intended installation surface.
S te p 5:
Align the mounting holes in the sides of the mounting brackets with the predrilled
holes in the mounting surface.