IEI Technology TANK-101B, User Manual, Page: 58 / 116

TANK-101B/BW Embedded System
Page 49
4.4.1 Host Bridge Configuration
Use the
Host Bridge Configuration
menu (
BIOS Menu 13
) to configure the Northbridge
chipset.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Chipset
> OnChip VGA Configuration
Initate Graphic Adapter [PCI/IGD]
******* Memory Information *******
Memory Frequency
800 Mhz
Total Memory
1024 MB
DIMM#0 1024
MB
DIMM#1 Not Present
Config On Chip VGA
Settings.
---------------------
ÅÆ
: Select Screen
↑ ↓
: Select Item
Enter Select
+ - Change Opt.
F1 General
Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 13: Host Bridge Chipset Configuration
Î
Initiate Graphic Adapter [PCI/IGD]
Use the
Initiate Graphic Adapter
option to select the graphics controller used as the
primary boot device. Select either an integrated graphics controller (IGD) or a combination
of PCI graphics controller. Configuration options are listed below:
ƒ IGD
ƒ PCI/IGD
D
EFAULT