IEI Technology S19A-QM87i-i, User Manual

Page: 37 / 137

S19A/S24A-QM87i-i5 Marine Panel PC
Page 25
Step 5:
Insert the panel mounting clamps into the pre-formed holes along the edges of
the rear panel.
Step 6:
Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel (
Figure 3-13
).
S te p 0 :
Figure 3-13: Tighten the Panel Mounting Clamp Screws
3.5.2 Stand Mounting
To mount the S19A/S24A-QM87i-i5 using the optional stand mounting kit, please follow
the steps below.
Step 1:
Locate the screw holes on the rear of the S19A/S24A-QM87i-i5. This is where
the brackets will be attached.